Deep Bathtub 1500 L x 800 W x 600 Soaking Depth Handmade by Omnitub

Deep Bathtub 1500 L x 800 W x 600 Soaking Depth Handmade by Omnitub.

The 1500 Long x 800 Wide Deep Bathtub from Omnitub is in many cases the ultimate and perfect deep bath for most installed environments.

It’s not too long that you will slide down it but it’s long enough to straighten your legs if that’s at the top or near the top of your goal list for your Deep Bathtub. Furthermore it’s amazing to shower over with most of the water coming off of the body hitting the side of the tub and not the screen or parting walls, depending on how you’re installing your 1500 Long Deep Bathtub.

The 1500 Long x 800 Wide Deep Bathtub can be installed in the following;

• Free Standing
• Along One Wall
• Inside Three Walls (Long Side Exposed)
• Inside Three Walls (Short Side Exposed)
• Within Two Walls (Corner)
• Undercounted (Finished Material Over The Tub such as Tiles/Marble/Stone)
• Below Ground (Rare in general, but when used for commercial and outdoors it’s more common, under decking for example).

The internal width is superb and just that much wider than other deep bathtubs, so it doesn’t look awkward on the eye and instead fits exceptionally well even in the smaller of soaking spaces.

It’s used as a generous one person soaking tub or a two person soaking tub. The space inside really is something special.

The waste hole Is located centrally at the bottom of the tub which makes it perfect to be used as a one or a two person soaking tub. It also makes it easy to visually place the overflow on any one of the four sides of the tub. Generally the most popular order of placing the overflow on this tub would be;

• Side A (100mm)
• Side B or C (75mm)
• Side D (75mm)

This is currently the only size we manufacture with another version which has 100mm on Side B. You can view it by touching here.

A few summary points to consider;

• As the overflow could be drilled on any of the four sides, we do not pre drill in advance, nor do we offer this service. There is a section on how to drill an overflow into the tub in the full technical & information guide which can be found on this page. Don’t worry, an Omnitub is very easy to drill into, remember there is no bowing, bulging or flexing in an Omnitub so there’s no risk of the tub cracking when drilling an overflow into the tub.
• The installed height depends on the installed environment. Most commonly the Omnitub is installed between 625mm and 750mm. For more information on installed height please refer to the full technical & information guide.
• The Omnitub can be trimmed to fit within a smaller space. For more information on trimming an Omnitub please refer to the full technical & information guide.
• Steps are subjective and certainly not essential. Most Omnitub’s are installed without a step. If the space permits then there’s no issue in installing a step but again, it’s certainly not an essential.
• The width requirement for your doorways is 630mm. Whilst an Omnitub Feet Kit is included with your order, they are removed for shipping and to make it easier to get through your property and into the space where it’s going to be installed.

The Omnitub 1500 L x 800 W Deep Bathtub is suitable to be installed;

• Indoor
• Outdoor
• Commercially

The Omnitub 1500 L x 800 W Deep Bathtub is suitable for hot/warm and cold use and have commonly been installed in commercial environments such as gyms and sports clubs for hot/warm and cold use.

Our design & manufacturing process is handled by our in house skilled team which is based in Somerset, England.

An Omnitub is warm to the touch, unlike stone, copper or other materials used in other bathtubs. An Omnitub is also strong, sturdy with no bowing or flexing unlike acrylic tubs used in other bathtubs. We manufacturing using OmniGel. A refined finishing material which is hand laid other a three lay process. It’s warm to the touch, strong, sturdy with no bowing or flexing. It’s also extremely repairable in the even that the worse happens and the Omnitub needs a repair.

We have spent many years refining our finished product, even our polishing and finishing it done in house giving us complete control over the manufacturing and quality control process.

All of our Deep Bathtubs are handmade in our factory in Somerset, England and are available to be shipped Worldwide. For more information please view our shipping policy.

Below is a chart showing up to date and accurate information on thre quickest delivery timescales for order placed to order delivered.

Choose delivery date on the Checkout for no additional cost.

You do not need to take delivery on this example. This is to simply show you the fastest and most up to date turnaround times on White Omnitub Orders.

Your delivery date can be in the future or you can choose to hold your order until you have a confirmed date for delivery.

The below table is for orders to be delivered to the United Kingdom only.

Delivery days are only Monday - Friday and do not include public and bank holidays. There is also closure for the Festive Period in December.

There are some areas in Scotland which require an additional two working days to the free delivery schedule.

Northern Ireland delivery requires an additional two working days to the free delivery schedule


We ship anywhere in the World where there is not conflict. To get a price for shipping, please fill our the International Shipping Enquiry form which can be found on this page.

For further information please refer to the Shipping Policy Page on our website.

• Can be manufacturered in any colour.
• Suitable for indoor, outdoor and commercial use.
• Can be used as cold plunge / ice baths
• Easy to drill additional holes such as overflow, taps, and more.
• Can be installed at a variety of heights
• Suitable to be submerged under the floor/ground level.
• 100% of the weight is taken on the base of the tub.
• Can be installed freestanding, in a corner, against one wall, against three walls, undermounted, overmounted.